Reactive Coatings

Powder, Epoxy and other Protective Coatings

Read this before repair, replace or Refinish Your Front Door

Check out your door. Is not rotten or bad? In fact, replacing could be the best thing to do, not only safety, but it could add value to your home. In addition, a gateway is not working properly can give money and be less energy efficient, and the lock is not working properly, either. It is very frustrating if you live in a house with an exterior door that is worn and old. Perhaps his glass door has glass fog outside can not see through, it only makes you frustrated. The problem is that it is necessary to repair the door, replace the door or repainting door. What are you doing?

There are several things to consider before deciding door repair, replace or refinish the door to your door. Why what needs to be repaired or replaced? What may have caused the bad state, besides age that has made it look so exhausted and do? If the front door is made of wood, if it is stained and is fading, what kind of sun exposure is the gate of? If the door is stained and has a polyurethane finish, bleaching may have occurred because he was exposed to the sun, beyond the industry standards. About 15 years ago, the polyurethane that was used in the exterior doors was much more efficient than today's polyurethane coatings. Because of that, which is used as little as 15 years ago stood up better to the sun's rays as coatings polyurethane do today. Also, if your door is stained red, like mahogany or cherry red, in fact, the first sun pulling out color to that color is actually the first to go. This makes the color of mahogany or cherry red to a more "brown" color in a few months. This may mean that the door still looks good, but over time, red pigment will be whitened by the sun.

More importantly, however, is no longer the polyurethane coating doing what is intended to do, which is to protect your wooden door. This may not be obvious at first, but is actually happening. First, small cracks can develop in the polyurethane coating, which allows moisture to penetrate. This in turn makes the wood swell, crack or split. In fact, really makes no difference what wood is. If cedar, cherry, oak or pine, it is still going to face this type of wear. Once the polyurethane coating has been worn and if not maintained, will in fact not in this way. To have this kind of protection that will, you will have to make two or three times a year with this type of polyurethane coating for any wood species.

If the door itself is painted and I painted several times, can still be rotting. Again, sun exposure is the most likely this type of wear. The wood itself also expands and contracts with exposure to heat and cold, rain and snow. However, the sun remains the main reason to wear on his door. If peeling paint on a door, the door will make it look better, certainly, but still not correct the problem. Even with this effort, moisture finds a way to penetrate the cracks that have occurred and you can not see with the naked eye. The sun is the reason for this, if you use paint or stain, and ultimately will make the wood rot. In turn, this eventually will cause your door completely not as a means of protection for your residence.

Al As with the door color, you still need to keep a door painted is exposed to the sun. Use of polyurethane for a door staining or painting a door graffiti is absolutely necessary. Another option for a stained door is to use a finishing coat of wax seals. With each change of the season wax to protect the door, as you might wax your car. This will help keep those cracks can be seen with the naked eye development. If you can see, you can be sure they been there for a while and that is better than going to fix your door quickly.

Again, it is important to understand that sun exposure is the most widespread of damage to your door for a long period of time. Imagine what could happen in your own wood furniture that you have left unprotected in its back cover after only a few weeks. You need constant maintenance on any type of wooden furniture or a product to protect from UV rays. How can you tell if the door is exposed for long periods of time in the sun, to the extent that exceeds industry standards?

The direction of the door of his face and is important. Standing in his doorway and note where the sun rises and sets. As the sun rises in the east and sets in the west, you should be able to say in which direction faces his door. If the door faces south, west or southwest, it becomes prolonged sun exposure and is likely to have a problem. The sun is at its most harmful in the afternoon. While the door is facing west or southwest, you get the most exposure to sunlight and therefore have more difficulty.

Manufacturers Most doors require you to have a slope that is equal in size from the bottom of the door at the bottom of the overhang. For example, if the door is 7 meters long and its slope is an additional 3 meters, the total excess amount is 10 feet. This is what we have to be within assurance standards of the manufacturer. If you know what your warranty covers and you know what your exposure is, you can save much money in the long term.

Is a little hard to know what your warranty will cover and the manufacturers are very strict in implementing the guarantee, but knowing what it covers will protect you and help you make the right decisions when it comes to replacing or repairing your exterior door. Whether it's a glass door with glass fog outside, or if the door has to be refinished or replaced, you can do know what their exposure is so you do not have problems in the future. Make sure you have the manufacturer's warranty and writing and everyone understands what the warranty covers and does not cover. Most of the guarantees of an exterior door does not cover labor to replace and does not cover anything if exposure the sun is too big. Therefore, this probably influence their decision whether or not decide to replace door, door repair or repainting of the exterior door.

About the Author

Peter researches and markets many iems over the internet. He has been in business for himself for over 25 years and operated JP Global Sales

Best Look Polyurethane $9.23 Int satin polyurethane Our most durable, tough, flexible, interior clear wood finish Dries fast, dust-free, in 2 to 4 hours, to recoat in 12 hours Recoat within 24 hours to insure good adhesion between coats Recommended for interior wood floors, furniture and woodwork, or wherever a tough abrasion-resistant clear finish is needed Available in gloss or satin finish Do not shake prior to application, stir gently until all of the flatting pigment is mixed in well (Repeat stirring during application) Apply with brush, roller, or spray May be thinned with up to 1/2 pint mineral spirits per gallon for spraying Covers 400 sq. ft. per gallon Clean tools with paint thinner or mineral spirits Satin, pint Brand #: - W54F00706-13 UPC: 009326774213 Keywords: clear wood finish polyurethane varnish

Wipe-on Polyurethane $11.32 Gls wipe-on polyurethane An oil-based polyurethane finish that provides a thin, durable layer of protection for interior wood Protects wood against water, household chemicals, food stains, and wear Provides a hand rubbed look with polyurethane protection and ambers less than other polyurethanes Can be used for cosmetic touch-ups on surfaces that have previously been finished with polyurethane and are scratched, worn, or nicked Not recommended for floors or use over white or pastel stains Apply by hand with a soft, lint-free cloth for best results For interior use only Gloss, pint Brand #: Minwax 40900 UPC: 027426409002 Keywords: polyurethane wipe on poly urethane finish

---

Anilines ...

Effect of particle sizes and pigment volume concentrations on the barrier properties of polyurethane coatings.: An article from: JCT Research $9.95 ...

---

This entry was posted on Friday, March 5th, 2010 at 7:22 pm and is filed under Coating. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.